Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 15 items
![[Proposal Document] Dust Monitor Calibration Service](https://image.www.ipros.com/public/product/image/b5b/2000527476/IPROS17742191901184370962.jpeg?w=280&h=280)
Because it is an issue related to the environment, I want to use it with peace of mind.
Isn't there something like this? ● Concern about misalignment after years of use ● Feeling the need for regular calibration due to ISO standards and internal criteria We will perform calibration based on the condition by comparing it with the shipping inspection acceptance criteria for the dust monitor.
![[Proposal Document] "Dust Monitor" for Monitoring Trace Leaks from Dust Collectors](https://image.www.ipros.com/public/product/image/fc4/2000527640/IPROS69599183364438217218.jpeg?w=280&h=280)
Proposal to secondary battery manufacturers: Prevent raw material loss from dust collectors!
Issue At a certain manufacturer's factory, due to installation errors and deterioration after the replacement of the dust collector filter, over 9 tons of raw materials were leaking from all the dust collectors every month. This resulted in a loss of approximately 27 million yen per month for the company, along with concerns about air pollution. Just thinking about how much sales would be needed to generate such profits is a waste, isn't it? Therefore, the installation of a dust meter to continuously monitor the leakage amount was required.
![[Proposal Document] Reliable Supply & Support System for Peace of Mind: "Dust Monitor"](https://image.www.ipros.com/public/product/image/389/2000527689/IPROS05241147867559613598.jpeg?w=280&h=280)
Leave it to us with peace of mind! Experienced technical skills and a robust support system!!
Because there are no input risks with domestic manufacturing, we can provide short delivery times, stable supply, and support. Please use our dust monitor calibration service to operate your equipment with peace of mind.
![[Case Study] Monitoring Dust Leakage with Dust Meters](https://image.www.ipros.com/public/product/image/de9/2001511837/IPROS14724373895752778943.jpg?w=280&h=280)
Zero complaints from the region! Monitoring is possible even with resin piping!
Even if the duct material is made of resin, we will introduce a case where a dust monitor was installed to monitor leaks. <Challenges Before Implementation> 1) Due to inadequate management of the dust collector, dust leaked and complaints were received from nearby residents. 2) There was a need for a sensor (dust monitor) that could detect even with resin piping. Therefore, we propose the dust monitor!! For more details, please refer to the related link URL.
![[Case Study] Dust Measurement in Tunnel Boring Machine Control Panel](https://image.www.ipros.com/public/product/image/a59/2001511840/IPROS6579322930316773325.jpg?w=280&h=280)
Prevent inverter board failures caused by dust!!
We will introduce a case of implementing an air particle monitor into the control panel of a tunnel boring machine. Dust generated during tunnel excavation can enter the control panel of the boring machine, leading to inverter failures. <On-site Challenges> 1) It is unclear when and from where dust will enter the control panel. 2) If the inverter fails, it incurs costs and delays recovery due to extended lead times. The "air particle monitor" solves these concerns! For more details, please refer to the related link URL.
Leave the troublesome document preparation to us! You can choose between hand delivery or direct shipping.
The "Overseas Rental Service" allows you to easily rent various measuring instruments overseas, just like in Japan. You can choose between "hand carry" by the customer and "direct shipping to the location" for the delivery method of the equipment. 【Advantages of Hand Carry】 - No transportation costs to the location * Domestic shipping fees will be required separately. - Pickup and return at the airport are possible. 【Advantages of Direct Shipping Overseas】 - No need to prepare necessary documents - One-stop service from equipment selection to document preparation and shipping ☆ We will prepare necessary documents such as non-eligible certificates for taking equipment overseas free of charge! * Some manufacturers may charge fees. * For more details, please refer to the materials with examples. Feel free to contact us with any inquiries.
Measuring near the exhaust outlet of the smoke removal device! Introducing solutions for measuring smoke separation effectiveness.
The "MODEL 3442" is a digital dust meter that utilizes the phenomenon of light scattering to convert and display mass concentration. It is equipped with a built-in lithium-ion rechargeable battery, allowing for long hours of continuous measurement. Additionally, it comes standard with a rubber protector and features a button layout designed with user-friendliness in mind, making it suitable for measuring in various work environments. It also offers auto-calibration, a variety of measurement modes, and comprehensive data logging and calculation functions, enhancing its utility. We also handle the inflow wind speed measurement "MODEL 6501 series" and the AnemoMaster Lite "MODEL 6006-D0." 【Features】 ■ Compact and lightweight ■ Built-in lithium-ion rechargeable battery for extended measurement time ■ Standard rubber protector *For more details, please refer to the PDF document or feel free to contact us.
Predicting leaks in dust collection equipment! Continuous monitoring can also lead to reduced maintenance costs.
We would like to introduce a case study of the dust monitor 'PFM-M01E' handled by Matsushima Major Tech. When considering capital investment in environmental measures, the challenge is how to reduce costs while maintaining productivity. Therefore, we propose this product. By continuously monitoring dust leakage, it not only contributes to environmental measures but also leads to predictive maintenance, resulting in reduced maintenance costs. 【Case Study】 ■Challenges - Visual monitoring → Already exceeding regulatory standards - Monitoring with a manometer → By the time of detection, it may already exceed regulatory standards - Manual analysis → There may have been leaks during periods without manual analysis - Preventive maintenance → Maintenance and labor costs are high ■Product Introduced - Dust Monitor 'PFM-M01E' ■Benefits - Continuous 24-hour monitoring in place of personnel - Detects minor leaks and predicts blowouts - Interpolates periods without manual analysis - Reduces maintenance costs through predictive maintenance *For more details, please refer to the PDF document or feel free to contact us.
Instantly detect anomalies in dust concentration! Prevent dust generation outside the factory and at work sites in advance, contributing to the prevention of health hazards and reduction of maintenance burdens!
Dust generated at work sites and dust collectors can affect the health of workers and nearby residents when inhaled. I believe that factories where dust is generated often use external organizations for regular measurements. However, regular dust measurements can make it difficult to quickly notice dust leaks, which may negatively impact the work environment and surrounding areas. Matsushima Majatech offers dust monitors that monitor dust concentration after dust collection and air dust monitors that monitor dust concentration in low airflow environments, both outdoors and indoors. By quantifying dust concentration in various situations and monitoring it 24/7, we contribute to the following: ● Prevention of health hazards ● Reduction of maintenance burdens ● Cost reduction 【Product Introduction】 - Dust Monitor - Air Dust Monitor - Air Particle Monitor
![[Case Study] How to Detect Foreign Contamination Before It Happens?](https://image.www.ipros.com/public/product/image/447/2001517076/IPROS5437300803925483876.jpg?w=280&h=280)
The dust monitor prevents foreign matter contamination! "Visualization" demonstrates its effectiveness!
In the manufacturing line where raw materials are transported by air, the filter of the transport device was damaged, leading to contamination of the products. Although there was no impact on distributed products, all products from the affected manufacturing lot were discarded due to foreign matter contamination. As a result, there was an opportunity loss amounting to several tens of millions. Challenges: - I want to detect abnormalities (damage) in the transport device's filter. - I want to quickly detect equipment abnormalities to minimize damage. For more details, please refer to the related link URL.
No dedicated software required! A particle counter that can be used for about 5 hours of continuous operation.
The "HHPC 6+" is an easy-to-use handheld dust meter. It can be used for approximately 5 hours of continuous operation. It complies with ISO 21501-4/JIS B 9921 and is suitable for cleanliness management. Additionally, it does not require dedicated software and can transfer measurement data to a computer. 【Features】 ■ Easy-to-use handheld type ■ Complies with ISO 21501-4/JIS B 9921 and is suitable for cleanliness management ■ Can be used for approximately 5 hours of continuous operation ■ No dedicated software required ■ Capable of transferring measurement data to a computer *For more details, please refer to the PDF document or feel free to contact us.
The sheath air mechanism enables stable measurements in workplaces with high concentrations of dust.
The LD-5D model is a relative concentration meter that employs a sheath air mechanism in the detection unit and incorporates a built-in suction pump, enabling measurements in relatively high dust concentration work environments such as tunnel construction sites. Relative concentration is based on the filtration collection method, and it is necessary to determine the mass concentration conversion coefficient (K value) to correct the mass concentration. However, the LD-5D allows for easy conversion and display of measurement values to mass concentration by pre-entering the mass concentration conversion coefficient. Additionally, it has similar characteristics to existing dust meters (laser light source type), allowing the use of previously established mass concentration conversion coefficients in the same work environment.
A more compact and lightweight portable digital dust meter.
The Digital Dust Meter DustMate LD-3K2 allows for easy conversion of count values to mass concentration by inputting the mass concentration conversion coefficient (K value). It also features a data recording function, enabling the recorded dust concentration data to be transferred to a computer. While we have enhanced its functionality, the operation is almost the same as existing digital dust meters, making it easy for those familiar with those dust meters to use. It is a product certified by the Japan Occupational Safety and Health Association. For more details, please contact us.
A more compact and lightweight portable digital dust meter.
The LD-3K2 model is a portable dust meter designed to enhance user-friendliness. Our digital dust meters are widely used for measuring suspended particulate matter related to work environments, and they have advantages such as obtaining data in a shorter time compared to filtration collection methods, as they operate as relative concentration meters using the light scattering method. On the other hand, the obtained relative concentration needs to be corrected to mass concentration by determining the mass concentration conversion coefficient based on the characteristics of the filtration collection method. This LD-3K2 model allows for easy conversion of the count values to mass concentration by inputting the mass concentration conversion coefficient (K value). Additionally, it is equipped with a data recording function, making it possible to transfer recorded dust concentration data to a computer. The logging measurement recording cycle can be set from 1 second to 99 minutes and 59 seconds. At a 1-minute cycle, continuous measurement and recording for up to approximately 44 days is possible. By pre-inputting the mass concentration conversion coefficient (K value), measurement values (CPM) can be easily converted and displayed as mass concentration (mg/m3). The scattering plate value and background value (BG) are retained even when the power is turned off. Furthermore, automatic correction of dust measurement values is performed using the scattering plate value and BG value data.
![Dust Meter "HHPC 6+" [Rental Agency - 30 Days or More]](https://image.www.ipros.com/public/product/image/c85/2000727748/IPROS37147377397489441585.png?w=280&h=280)
No dedicated software required! A particle counter that can be used for about 5 hours of continuous operation.
[30-Day Rental: From 70,000 yen] We offer a rental intermediary service for this product. If you are interested, please contact us via the inquiry form. A representative will get back to you shortly. (Agreement to the terms of use is required for rental.) The 'HHPC 6+' is an easy-to-use handheld dust meter. It can be used continuously for about 5 hours. It complies with ISO 21501-4/JIS B 9921 and is suitable for cleanliness management. Additionally, it does not require dedicated software, allowing measurement data to be transferred to a computer. [Features] ■ Easy-to-use handheld type ■ Complies with ISO 21501-4/JIS B 9921, suitable for cleanliness management ■ Can be used continuously for about 5 hours ■ No dedicated software required ■ Capable of transferring measurement data to a computer *For more details, please refer to the PDF document or feel free to contact us.
